Filter By:
- 24-Inch & Smaller (24)
- 26-Inch (18)
- 650B (38)
- 29-Inch (61)
- 700c, 27-Inch & 650c (99)
- Fat Bike (3)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$500.00
Handbuilt in the WRC Service Lab.
Rims: H Plus Son Archetype 28H Polished, for rim brakes
Front Hub: Paul Components FHub Quick Release Polished
Rear Hub: Paul Components W.O.R.D. Single-Speed Bolt-On
Spokes: DT Competition Double-Butted
Nipples: Alloy, Gold Anodized
PAUL HUBS
Front: This front hub with a funny name does everything a reliable, serviceable, lightweight front hub should do and more. It spins very smoothly due to specially machined bearing bores and high quality precision sealed cartridge bearings. The axle is turned from high-strength 7075 aluminum, and is the quick-release version.
Rear: The hub that started all that single speed mountain bike silliness: The Wacky One-speed Rear Device. The W.O.R.D. comes with special machined axle bolts which Paul affectionately calls “Fancy Bolts”. The washers are made of brass and have deeply knurled contact faces. This ensures they’ll grip onto dropout faces without marring the frame, yet will still be able to be loosened easily trail side.
H PLUS SON ARCHETYPE RIMS
Weight: 470 grams
Material: G609 Alloy
Height: 25 mm
Width: 23 mm
Joint: Welded
Machined Braking Surface For Rim Brakes
ERD: 595 mm
Max Tension: 125KGF
$76.99
Upgrade or refresh your bike.
- Original equipment replacement 24" 6-bolt disc brake wheels for Trek bikes
- QR hubs: 100mm OLD front and Boost 141 rear
- Pinned aluminum 35mm wide rims
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$76.99
Upgrade or refresh your bike.
- Original equipment replacement 20" 6-bolt disc brake wheels for Trek bikes
- QR hubs: 100mm OLD front and Boost 141 rear
- Pinned aluminum 35mm wide rims
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$440.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name.
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts.
LIGHTWEIGHT X RIDE QUALITY:
As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride.
*1,485 grams production sample weight. Final weights may vary slightly.
TUBELESS COMPATIBLE:
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires.
RELIABLE PERFORMANCE:
Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance.
- Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width
- Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub)
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm
- Max Pressure: 130psi
- Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$1,499.99
The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing.
- Use - XC racing & riding Weight - 998g (w/ valves and rim tape)
- Recommended Tires - Fast Trak & Air Trak
- Internal Width- 28.5mm
- Hubs - Roval LF DT180 EXP
- Bearings - Sinc Ceramic
- Spokes - Roval Carbon w/ Ti Ends
$999.99
Survival of the Strongest
Traverse HD 240 DEG
The Traverse HD is the strongest carbon trail wheel we’ve ever tested, engineered for those who live to send it—maybe harder than they should. Designed to handle big hits and rowdy lines, the Traverse HD 240 DEG is built to keep rolling no matter how hard you charge.
At a Glance
Use - Aggressive Trail, Enduro
Weight (29") - 1,795 grams (with valves and tape)
Front: 780g
Rear: 1,015g
Recommended Tires - Butcher and Eliminator
Internal Width - 30mm
Hub - DT Swiss 240 DEG
90 Teeth / 4 Degrees
Spoke Count - 29 Front: 28H / 29 & 27.5 Rear: 32H
Front Hub- DT Swiss 240 J-Bend, 6-Bolt, 15x110mm, 19mm OD End Caps Installed
$1,399.99
Survival of the Strongest
Traverse HD 240 DEG
The Traverse HD is the strongest carbon trail wheel we’ve ever tested, engineered for those who live to send it—maybe harder than they should. Designed to handle big hits and rowdy lines, the Traverse HD 240 DEG is built to keep rolling no matter how hard you charge.
At a Glance
Use - Aggressive Trail, Enduro
Weight (29") - 1,795 grams (with valves and tape)
Front: 780g
Rear: 1,015g
Recommended Tires - Butcher and Eliminator
Internal Width - 30mm
Hub - DT Swiss 240 DEG
90 Teeth / 4 Degrees
Spoke Count - 29 Front: 28H / 29 & 27.5 Rear: 32H
Rear Hub - DT Swiss 240 J-Bend, 6-Bolt, 12x148mm
$360.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name.
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts.
LIGHTWEIGHT X RIDE QUALITY:
As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride.
*1,485 grams production sample weight. Final weights may vary slightly.
TUBELESS COMPATIBLE:
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires.
RELIABLE PERFORMANCE:
Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance.
- Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width
- Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub)
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm
- Max Pressure: 130psi
- Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg
$499.99
World Cup speed meets trail durability
World Cup Fast, Trail Tough
XC speed meets trail-ready durability with the new high-value Control SL V 370. Weighing just 1,590g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. Sapim D-Light spokes pair with the durable and fast-engaging DT Swiss Ratchet LN for 20-degree engagement. A 4mm FlatStop beadhook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance.
At a Glance:
- Use: XC Racing & Down Country Ripping
- Weight: 1,590g (with tape and valves)
- Rim Details: Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm
- Hub & Engagement:DT Swiss, Ratchet LN 18T
20 degrees Spokes: Sapim D-Light spokes - Tire Recommendation: AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” - Brake Mount: 6-bolt
20 degrees Spokes: Sapim D-Light spokes - Tire Recommendation: AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” - Brake Mount: 6-bolt
$699.99
World Cup speed meets trail durability
World Cup Fast, Trail Tough
XC speed meets trail-ready durability with the new high value Control SL V 370. Weighing just 1,590g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. Sapim D-Light spokes pair with the durable and fast engaging DT Swiss Ratchet LN for 20 degree engagement. A 4mm FlatStop beadhook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance.
At a Glance
Use
XC Racing & Down Country Ripping
Weight
1,590g (with tape and valves)
Rim Details
Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm
Hub & Engagement
DT Swiss, Ratchet LN 18T
20 degrees Spokes: Sapim D-Light spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount
20 degrees Spokes: Sapim D-Light spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount
$699.99
World Cup speed meets trail durability
World Cup Fast, Trail Tough
XC speed meets trail-ready durability with the new Control SL VI 350. Weighing just 1,478g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. DT Swiss Revolution spokes pair with the durable and fast engaging DT Swiss Star Ratchet for 10 degree engagement. A 4mm FlatStop bead hook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance.
At a Glance
Use
XC Racing & Down Country Ripping
Weight
1,478g (with tape and valves)
Rim Details
Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm
Hub & Engagement
Hub: DT Swiss, Star Ratchet 36T
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt
$999.99
World Cup speed meets trail durability
World Cup Fast, Trail Tough
XC speed meets trail-ready durability with the new Control SL VI 350. Weighing just 1,478g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. DT Swiss Revolution spokes pair with the durable and fast engaging DT Swiss Star Ratchet for 10 degree engagement. A 4mm FlatStop bead hook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance.
At a Glance
Use
XC Racing & Down Country Ripping
Weight
1,478g (with tape and valves)
Rim Details
Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm
Hub & Engagement
Hub: DT Swiss, Star Ratchet 36T
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt
$725.00
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road.
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- System Weight Limit: 275lbs /125kg.
$1,025.00
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road.
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi).
- Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve).
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- System Weight Limit: 275lbs / 125kg
$1,175.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,625.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,000.00
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.
- Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve)
- Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg
$1,099.99
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement.
- Rim Type: Carbon Clincher, tubeless-first
- Rim Material: Advanced Carbon Composite
- Rim Width (internal): 25mm
- Rim Depth: 32mm
- Front Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Count: 21
- Spoke Type: DT Swiss Aerolite T-head
- Nipple Type: DT Swiss Pro Lock Alloy hexagonal
- Spoke Length: Right/Left: 276mm/274mm
- Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap
- Assembly Method: Handbuilt
- Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)
- Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g
$1,400.00
From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions.
Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels.
What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels.
Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority.
Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm
Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
Bearing Type: DT Swiss SINC Ceramic Bearings
Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm
Nipple: DT Swiss Hex Prolock Al 2.0x14mm
Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve)
Assembly Method: Hand built at every step, from rim layup to the last nipple turn.
Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$109.00
Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black
$129.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
$79.00
Double-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at competitive pricing. These wheels are the new standards in repair staples.
- Shimano hub
- Rim brake use
- Includes Schrader-to-Presta rubber rim grommet
$95.00
Double-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at competitive pricing. These wheels are the new standards in repair staples.
- Rim brake use
- Made with components rated by their manufacturer as suitable for e-bike use
$119.00
If you need just one wheel to stock for on-the-spot repairs, these wheels feature both Rim Brake and Disc Brake compatibility.
- Shimano hub
- Center-Lock Disc and rim brake
- Shimano Hub
- Center-Lock Disc
- Includes skewer
- Tubeless Ready
- Rotor Lock Ring not included
$119.00
Rear wheel for track style and fixie bikes. Flip flop hubs allow freewheel one side and fixed the other. You'll be hard-pressed to find a better wheel anywhere near these prices.
- Rim brake use
- Formula hub
$95.00
Single-wall rims, Shimano hubs, stainless steel spokes and premium nipples - all at an entry-level price. These wheels are perfect to get those coaster brake bikes back on the road.
- Coaster brake
- 3/8" Threaded x 124mm
- Small parts and 18t cog included
$79.00
Single-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at lowest pricing. These wheels are the new standards in affordable repair solutions.
$165.00
Value and performance blended wheels for 29" mountain bikes and 700c commuter bikes with 142mm x 12 MTB drivetrain. Tubeless ready rims and a 23mm inner rim width will accommodate tires of multiple sizes. Rims come tubeless taped but can also support tubes and clincher tires without modification.
- Tubeless ready rim
- 23mm inner rim width
- Bear Pawls hub
$1,080.00
Your race calendar is starting to fill up, but you've also got a bucket list trip to Moab on the horizon—limit your worries to keeping your GPS charged, not your wheelset. A true do it all option, the TR280 wheelset was conceived as a gravity-capable wheelset on a diet. The TR280 mounted to the Hydra system chassis is adept at nimble maneuvering and perfect long days in the saddle.
- Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required.
- Complete system wheel warranty coverage against defects on your carbon wheelset for as long as you own them.
Page 1 of 9
Next page