CO2 Inflators

Tubeless tires were supposed to mean the end of flats, but while flats are significantly reduced, they still remain a part of our life with tubeless setups. Stan's DART Tool aims to make the inevitable tear or large puncture quick to fix by plugging holes and instantly sealing flats. -STAN's solution to tears and punctures on your tubeless setup -Barbed plastic tip anchors into tire, won't tear rim tape -Flexible material conforms to puncture and bonds with sealant -Excess material wears off clean so you don't need to trim -Lightweight and compact for easy storing in your pocket -Two pre-loaded DARTs included in clear cap to keep clean

Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

Replacement cartridges for the CPRO2 Trigger, Air Tool CO2 Mini Kit 25g, Air Tool MTB CO2 Mini Pump, and SWAT™ Box. Compatible with screw-type refills and Specialized CPRO2. All USA orders containing CO2 cartridges will ship FedEx Ground.

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

Blast off with Planet Bike's Airship 2.0 CO2 Bike Tire Inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride. - Lightweight aluminum design stores cartridge and protects from cold cartridge when in use - Auto head fits both Presta and Schrader valves - Accepts 16g threaded and non-threaded cartridges - Includes one 16g threaded CO2 cartridge - Small size fits in saddle bag or jersey pocket - Length: 130mm - Weight: 123 grams

You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."

- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

A micro-sized tubeless tire repair and inflation kit featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tire in one step with massive air or can simply be used as a traditional CO2 inflator via the valve stem. The inflator head is compatible with both Presta and Schrader valves and the included velcro strap attaches to seatposts, saddle rails, or frame tubes and can carry one or two threaded 16g or 25g CO2 cartridges. - Advanced press type CO2 inflator, one 25g CO2 cartridge, stainless steel 2-in-1 tire reamer/plug insertion tool, plug retainer, and disc insertion spacer - CNC aluminum inflator head fits Presta / Schrader valves - Repair plug compartment, velcro strap, dust cap - Adjustable velcro strap mounts to seatpost, bike frame

Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.

The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.

Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Includes two 16g CO2 cartridges & insulator sleeve - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)

Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)

Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams

You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."