Bells/Noise Makers

Add a soundtrack (and some fun) to your ride with BellBeats, a handlebar mounted bicycle bell and bluetooth speaker. Never miss a beat Add a soundtrack and a smile to your ride with BellBeats — a digital bike bell and Bluetooth® speaker that easily mounts to your bike's handlebar. Its high-quality Harmon speaker offers clear audio for music, navigation, and alerts. Eight pre-loaded bell sounds range from fun and friendly to urgent to help you communicate the right message to others while you ride. PRODUCT DETAILS - Bluetooth speaker streams music, podcasts, or audio navigation from connected phone - Eight pre-loaded sounds range from friendly to urgent for alerting others - Quality audio optimized by Harmon with up to six hours of music playtime - Alert tones are engineered to be easily located by others for less surpise and more smile - Easily accessible ergonomic controls control both bell and speaker - Digital four-bar LED battery gauge is easily visible - USB-C charge port with IP67 dust and water resistance rating - Includes mount and shims, belt clip, and USB-C charging cable, compatible with bars 25-31.8mm

The Timber Model YEW bell is designed to alert other nearby trail users of your presence. Using a spring-loaded on/off switch, the bell can be turned on, ringing activated by the bikes motion, or it can be silenced when not needed. The Timber bell offers a friendly way to warn other trail users of your approach. - Spring loaded piston on the on/off lever for smoother shifting - Fits 35mm bars (includes shims for standard 31.8mm and 22.2mm bars) - A hinge pin in the bar clamp provides easier mounting and secure holding power

A bell built to Spurcycle standards using 30% fewer parts and a singular focus. Lighter and more compact, it's the perfect bell for a dialed ride. Engineered for the same lasting Spurcycle sound. Ring early and roll through with path-clearing resonance Fixed mount sizes made of composite nylon. Fewer parts mean lower cost, easy install, and simple crash repairs Half the mount width. Compact form fits easily between handlebar components loud enough to grab attention yet emit a friendly tone, enhancing communication without being jarring

Spurcycle bells create powerful, enduring sound. Give notice well in advance with a loud, convincing tone. Precision built in the USA for a lifetime of way clearing. Materials: stainless steel with brass alloy Dome and aluminum Hammer Finish: Raw or Black DLC Dome size: ?30mm x 20.5mm Weight: 45g

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Ding Dong! These big colorful bells sound like a door bell with their two tone ring. The dome is over 3” wide for a deep attention getting ring. Two screw secure mounting and a rubberized thumb lever make these fun and durable.