Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pumps/Inflation

Topeak Presta Valve Extender
$8.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Presta Valve Extender XL
$11.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak SmartGauge D2x Pressure Gauge
$57.99
This sleek, lightweight and compact digital tire pressure gauge works seamlessly with Presta and Schrader valves without changing internal head parts. The digital gauge provides accurate pressure readings up to 260psi / 18bar. The illuminated 360o rotating gauge is easy to read from any angle in daylight or darkness. Compatible with bike / motorcycle / car tires, forks and shocks and the Air Pressure Adjusting Mode continuously reads pressure when using the air release button to fine tune tire pressure.
Stan's No Tubes DART Tool
$24.99
Tubeless tires were supposed to mean the end of flats, but while flats are significantly reduced, they still remain a part of our life with tubeless setups. Stan's DART Tool aims to make the inevitable tear or large puncture quick to fix by plugging holes and instantly sealing flats. -STAN's solution to tears and punctures on your tubeless setup -Barbed plastic tip anchors into tire, won't tear rim tape -Flexible material conforms to puncture and bonds with sealant -Excess material wears off clean so you don't need to trim -Lightweight and compact for easy storing in your pocket -Two pre-loaded DARTs included in clear cap to keep clean
Specialized Air Tool MTB Floor Pump
$66.98 $89.99 26% Off
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc
Specialized Air Tool MTB Pump
$25.99 $34.99 26% Off
The Air Tool MTB pump is Speialized's most dependable and durable big-volume frame pump. It's intended to be carried on the bike for use in all off-road conditions. You'll find that it features a new inverted design, so it greatly increases air capacity, which reduces pump time by up to two minutes. - All new inverted, double chamber design increases the air handling capacity by 28% compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 100cc
Specialized Air Tool Pro Smart Head and Hose
$9.99
Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.
Specialized Air Tool Road Mini Frame Pump
$21.99 $29.99 27% Off
The best road mini pump does two things well—it inflates tubes quickly, and it stashes easily. The reliable Air Tool Road Mini pump moves almost twice as much air as its predecessor, thanks to its inverted dual chamber design. It gives you total peace of mind on days when pesky flats catch you off-guard. Inverted dual chamber design is smaller yet moves 58% more air per stroke when compared to our previous design, reducing pumping time by up to four minutes. Presta-only head with updated dust cover prevents pump from opening due to vibration. Machined outer barrel for extra grip while pumping. All-aluminum inner and outer chamber for durable performance. Water bottle boss frame mounting bracket included. Max pressure: 100 PSI (6.9 bar) Volume-per-stroke: 30cc Volume-per-stroke: 30cc Water bottle boss frame mounting bracket included.
Specialized Air Tool Road Pump
$25.99 $34.99 26% Off
The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc
Specialized Replacement Hose - Sport/Comp/HP
$9.99
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
Specialized SWAT Mini CO2 Head
$11.99
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Silca Gravelero Mini Pump
$75.00
The same great performance as our award winning Tattico, now with 35% more air volume. The GRAVELERO mini-pump builds from the same hose, chuck, and plunger design of our multi-award winning Tattico pump, in a package that pushes 35% more air from the same overall length. The design has been further refined for gravel and off-road use with a smooth outer texture and improved sealing to reject dirt and mud while also making for easy cleaning. • Light-weight, aluminum handle and barrel • Retractable hose • Thumb-lock, reversible chuck: Schrader or Presta • 80 psi • 9.5 inch / 243mm length • 139 grams • Includes direct-mount bracket with retaining strap
Silca Pista Plus Floor Pump
$199.00
Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve
Silca SuperPista Digital Floor Pump
$349.00
With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi
Silca Tattico Mini-Pump
$70.00
Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap
Shimano PRO Team HP Mini Pump
$44.99
The HP of the PRO Team HP mini pump stands for High Pressure and allows you to pump fast and generate a pressure up to 160psi. A retractable, flexible hose is located inside the pump body and is suitable for both Schrader and Presta valves. Thanks to the included frame mount, you'll always have Team HP mini-pump on your bike when you need it.
SKS Digital Airchecker
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Planet Bike 16g CO2 Replacement Cartridges - Threaded
$3.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
Planet Bike Red Zeppelin CO2 Inflator
$19.99
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool GP-2 Glueless Super Patch Kit
$4.95
Park Tool worked with 3M® to produce a self adhesive tube patch that stretches, flexes, twists, and turns right along with the tube. No messy glue, no bulky packaging. Lightly roughen tube with the included sandpaper, clean, apply patch, and you’re ready to go.
Park Tool Vulcanizing Patch Kit
$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
OneUp Components EDC Pump
$65.00
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
MSW CO2-38 Cartridges
$16.99
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually
MSW Ride and Repair Kit with Seatbag and CO2
$54.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
MSW Tool Hugger Kit
$54.99
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
Lezyne Control Drive CO2 16g
$27.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge
Lezyne Gravel Digital Drive
$84.99
The Gravel Digital Drive is a high-quality bike floor pump with a medium-sized barrel designed specifically for gravel bikes and other mid-volume tires. The chuck is tubeless specific and “flips” for Presta, or a threaded Presta shaft (with the valve core removed) to provide more airflow for seating tubeless tires. Its barrel and piston are built from high-grade, durable steel and mounted to a rugged Composite Matrix base. Pumping is versatile and more efficient thanks to an extra-long hose and a larger 3.5” (88.9 MM) digital gauge, which provides precise measurement up to 100 PSI (6.9 BAR). And its classic wood handle is stylish and very comfortable to use. The Gravel Digital Floor Drive is built in-house, 100% quality controlled and fully rebuildable for long-lasting operation. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (100 psi / 6.89 bar) - Extra-long nylon-reinforced braided hose with aluminum couplers - Varnished wood handle - ABS1 Pro with Presta / valve stem chuck
Page 1 of 2 Next page