Parts & Accessories

Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. -20L capacity. -Easy-access pocket. -Fully padded laptop compartment. -Large front pocket. -Easy-carry handles. -Compatible with Coolcave pannier.

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility Designed for frictionless compatibility with the Globe Haul ST and its suite of accessories*. *Not compatible with Globe Pegs due to shared mounting location. Accepts most standard bicycle panniers, such as the Specialized Coolcave. Includes two pannier adapters (one for each side of the rack) and all required hardware. 8kg (18lb) load capacity per side. Additional tools required for rear installation (not included).

All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. Compatible with Globe Haul ST rear rack and Globe Front Rack. Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. Includes all required tools when purchased with the Globe Haul ST.

Our Turbo SL Y-Charger Cable lets you simultaneously charge your Specialized SL Battery and Range Extender. Custom Y-split cable simultaneously delivers power to both the main internal battery and the SL Range Extender Battery. Length: 1000mm

Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.

This Duraflex™ Bladder Hose Clip is perfect to add to any existing 3/4" or 1" webbing OR get it with a 1" OneWrap Velcro™ strap and add it to anything. Single Clip has 1" slots and 3/4" slots. Split bar makes adding it to any existing webbing easy. Clip has the ability to rotate to any angle Option of 4.5" of OneWrap included at no extra charge. Great for our following products: Portero™ Backpacks Royale™ Hip Packs (needs the OneWrap strap) Lunch Box™ Handlebar Bags Chuckbucket™ Handlebar Bags (needs the OneWrap strap) SuperWedgie™ Frame Bag Half Pack™ Frame Bag Bodega™ Frame Bag

This Duraflex™ Bladder Hose Clip is perfect to add to any existing 3/4" or 1" webbing OR get it with a 1" OneWrap Velcro™ strap and add it to anything. Single Clip has 1" slots and 3/4" slots. Split bar makes adding it to any existing webbing easy. Clip has the ability to rotate to any angle Option of 4.5" of OneWrap included at no extra charge. Great for our following products: Portero™ Backpacks Royale™ Hip Packs (needs the OneWrap strap) Lunch Box™ Handlebar Bags Chuckbucket™ Handlebar Bags (needs the OneWrap strap) SuperWedgie™ Frame Bag Half Pack™ Frame Bag Bodega™ Frame Bag

Occam's flagship product brings to the trail a sleek design and incredible functionality. Safely and securely carry all of your repair equipment and rest assured that it’ll be there, ready and waiting, whenever you need it. X-Pac construction is durable and UV resistant BOA FIT SYSTEM provides fast, effortless mounting to anywhere on your frame Adjusts to fit nearly any bike in existence 28 grams — roughly equivalent to 1/8th of your favorite canned beer

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame

Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

Extend the life of your Dummy bags with this replaceable wear patch.