Filter By:
- Parts & Accessories (37)
- Cranksets (30)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Cranksets

$21.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings
- Set of 5

$5.00
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system.
- Bolts designed specifically for use with CAMO spiders and rings
- Includes 5 Torx head M5 x 8mm bolts
- ED coated steel is durable
- Bolts include a blue Nylok patch for a secure installation
- Torque bolts only to 4-5 Nm and use blue Loctite threadlocker

$3.49
$4.99
30% Off
CAMO colored bolts are replacement bolts for use with CAMO chainring and spider.
The CAMO chainring system was created by the Wolf Tooth engineers for Chainline And Material Optimization on direct mount style Chainrings. The key advantages include:
-Perfect chainline - for wear and shifting precision
-Optimal material usage - for weight, stiffness, and wear
-Price - for less expensive replacement chainrings
-Swapping - Very fast chainring change out with 5 small bolts and no nuts.
-Availability - Wolf Tooth is the one-stop-shop for your direct mount needs...round or oval, stainless or aluminum, and no matter the crankset.
-Bling!! - spider colors and bolt colors add a little flash to your sweet ride.
-Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
Compatibility:
-These bolts were specifically designed for use with our CAMO chainring system
-Correct torque and blue loctite thread locker must be used if blue Nylok patch is not already applied
Installation notes:
-You will be able to access all bolts without removing the spider
-Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.
-Be sure the bosses on the spider "plug in" to the chainring.
-Torque bolts only to 4-5 Nm and use blue Loctite threadlocker

$29.95
$29.99
On Sale
CAMO Spider
- Made from Aluminum alloy for light weight
- Includes 5 black chainring bolts

$29.95
$29.99
On Sale
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank

$14.18
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D. for use with SRAM DUB cranks
- 10 spacers per bag
- Machined engineering-grade Delrin

$14.18
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 1.0mm thick
- 10 spacers per bag
- Machined engineering-grade Delrin

$6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually

$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

$64.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

$6.99
$9.99
30% Off
This Wheels Manufacturing Spacer kit for BB30 Outboard bottom brackets includes 42mm ID spacers that fit between the BB30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm

$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

$6.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.

$13.60 - $14.18
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag

$22.50
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag

$64.99
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

$11.19
$15.99
30% Off
This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm

$113.00
The Descendant 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability.
- SRAM DUB technology creates a lighter, stiffer and stronger crankset
- Optimized 6000 series forged aluminum arms
- Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
- Chainring is designed specifically for Eagle chains and drivetrains
- DUB compatible bottom bracket sold separately
BB Included: No
Chainring BCD: SRAM Direct Mount
Crank Intended Use: Mountain
Number of Chainrings: Single
Drivetrain Speeds: 12, 11, 10
Spindle Interface Type: SRAM DUB
Chainline/Hub Compatibility: 135/142 MTB Hubs

$27.99
$39.99
30% Off
• Singlespeed crankset
• Alloy crankarms w/ solid steel chainring
• Square taper interface
• Does not include BB

$33.59
$47.99
30% Off
Shimano's Alivio mountain crankset offers smooth and precise shifting performance for trail focused riders. Its 2-piece design and narrow Q-factor provide quality, comfortable MTB riding.

$25.89
$36.99
30% Off
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains.
- Hyperdrive SG-X chainrings
- 7/8-speed compatible
- Spindle interface type: Square Taper JIS

$51.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings.
- Spindle Interface type: Square Taper JIS

$39.19
$55.99
30% Off
The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings.
- Chain guard included
- 9-speed

$74.19
$105.99
30% Off
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting.
- Hyperglide technology ensures smooth and reliable shifting
- 4-gear arm crank design
- Includes crank arm fixing bolt

$93.09
$132.99
30% Off
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding.
Features:
- HOLLOWTECH II Crankset (3x10-speed)
- Efficient power transfer
- HOLLOWTECH II crank arm with 4-arm construction
- Composite chainring
- Close step tooth profile for smooth shifting
- Bottom Bracket compatibility: SM-BB52/BB-MT500-PA
- Chain Line: 50

$72.09
$102.99
30% Off
Optimized gear range for big wheel bikes
Smaller front chain rings and wide gear combination
Consistent shifting and silent driving with active rear suspension
Uninterrupted shifting with active suspension
Single spike structure for robust shifting
No driving noise with active suspension
Page 1 of 3
Next page