Filter By:
Hubs

$33.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

$19.99
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

$21.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings.
- Double contact sealing
- Super polished bearing races for low-friction rolling

$329.99
For optimum wheel strength and reliability, Shimano's Dura-Ace Rear Freehub is made of cold-forged aluminum with an oversize shell, sturdy flanges, a titanium freewheel body and a 15mm internal axle. Inside, diamond-polished bearing races and stainless-steel ball bearings minimize rolling resistance, while high-tech seals keep out water and dirt for maximum durability. This hub also features tool-free bearing adjustment for easy maintenance, plus a light and strong aluminum/steel quick-release skewer.

$212.99
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes

$1,477.99
- Ideal for pedaling a fatbike through the harshest conditions
- 14-speed internal rear hub drivetrain system shifts under load
- Disc compatible: requires Rohloff specific 4-bolt rotor (sold separately)
- Reliable, low-maintenance internal design for reduced wear
- Highly efficient with no gear overlap and maximum ratio range
- Shift indexing originates at the hub, instead of the shifter
- Includes 14-speed twist shifter, 16t cog, cables, and housing

$94.99
OEKMFH01 1/1 - MTN - HG - Freehub Complete Kit w/ bearings, pawls, springs & seal
Convert or replace your existing 1/1 mountain freehub body with this complete HG 9/10/11 spd kit. Includes everything you need to swap the freehub and get riding!
Compatible With
1/1 mountain rear hubshells
Includes
1 - 1/1 HG freehub body shell
1 - bearing spacer
1 - 152610 bearing
1 - 15267A3 bearing
6 - 1/1 pawls
6 - 1/1 springs
1 - freehub body seal
1 - 1/1 freehub retaining ring

$114.99
OEKMFH214 1/1 - MTN - MS - Freehub Complete Kit w/ bearings, pawls, springs & seal (includes DS 12x148 endcap)
Convert or replace your existing 1/1 mountain freehub body with this complete Micro Spline 12 spd kit. Includes everything you need to swap the freehub and get riding!
Compatible With
1/1 mountain rear hubshells
Includes
1 - 1/1 Micro Spline freehub body shell
1 - bearing spacer
1 - 152610 bearing
1 - 6802A3 bearings
6 - 1/1 pawls
6 - 1/1 springs
1 - freehub body seal
1 - DS end cap

$447.99
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$239.99
The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

$219.99
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.

$228.80
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.

$448.80
The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.

$223.99 - $310.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion

$94.10
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.

$61.30 - $83.10
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.

$105.00
-Replacement freehub body
-Compatible with select Aeolus Pro, Aura, Race Lite, and -Paradigm Comp wheels
-End cap sold separately

$209.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset.
Product details
- Bontrager rear hub for use with 197mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 59.5mm
- DS flange offset: 46mm
- 32 hole, 6-bolt rotor

$79.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 110mm forks
- Flange diameter: 58mm
- NDS flange offset: 25.5mm
- DS flange offset: 37.75mm
- 28 hole, 6-bolt rotor

$105.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 150mm forks
- Flange diameter: 58mm
- NDS flange offset: 45mm
- DS flange offset: 53.5mm
- 32 hole, 6-bolt rotor
Page 1 of 2
Next page