Cables

Sold as each Cable Length: 1700mm Cable Material Stainless Steel Intended Use: Campagnolo Brake Cable Diameter: 1.6mm

1.2mm x 2,000mm

- Steel cable noodle with alloy end caps - Includes plastic liner

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

ø 1.2 mm x 2100 mm OPTISLICK Stainless steel Sealed outer caps, plastic (5 pcs.) Sealed outer caps nose (1 pc.) Rubber shields (1 pc.) Inner end caps (1 pc.) OT-SP41 2000 mm

Inner Cable: 1.2mm x 2100mm Stainless Steel Comes with the following: sealed outer caps (plastic 5pc), sealed outer caps nose (1pcs), rubber shields (1pcs), inner end caps (1pc)

Shimano Optislick Derailleur Cable and Housing Set Includes 1.0 x 2100mm shift cable, 1.0 x 1800mm shift cable, and 1 x 1700mm housing

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Stainless steel inner 2100 mm (2 pcs.) Stainless steel SIS-SP40 outer caps (4 pcs.) SIS-SP40 sealed outer caps (1 pc.) OT-SP41 sealed outer cap for rear derailleur (1 pc.) Inner end caps (2 pcs.) OT-SP41 1700 mm

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

Comes with extra section of RS900 housing for frame to rear derailleur section. - 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

Shimano OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm

Comes with extra RS900 housing for frame to rear derailleur section. Shimano OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm

Brand: Shimano Description: SIL-TEC Road brake inner cable. Stainless steel construction, PTFE coated for improved lifespan and increased resistance. Length: 2050 mm Diameter: 1,6 mm ?

Shimano stainless steel derailleur cable, 3000mm length is long enough for a tandem bike Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

Origin-8 Plastic Cable Guides provide a quick, easy, clean routing system for your cables. Great for disc brake lines or for rear brake cable housing guides, they mount to any frame type. The plastic guide will not damage the frame and no need to worry about corrosion. - Zip ties to frame - 2 per package

EZ-Bend housing segments are an essential accessory when using Kevlar®-reinforced compressionless brake housing on bikes with drop handlebars. Short, flexible sections of housing allow the housing to tuck neatly next to the handlebar, under the bar tape Since compressionless brake housing requires the use of end caps, this allows its use with brake levers that do not accommodate end caps.

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Flexible construction resists compression and adjusts angle automatically

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Dropper seatposts are quickly becoming standard equipment on mountain bikes across the globe, and for good reason. While most droppers use traditional shift cables and housing, the Jagwire Pro Dropper Kit is the first cable and housing system designed from the ground up to ensure they work as well as possible. The included dropper-specific 0.8mm Pro Polished stainless inner cable interfaces seamlessly with remote levers and actuator arms to provide effortless cable movement. And the innovative FLEX-SL housing is more flexible than standard shift housing, allowing for easier installation with internally-routed seatposts and providing smoother cable movement. With all needed parts included, Pro Dropper Kits are simple to install. - Pro Polished cables combined with improved Slick-Lube housing liners offer enhanced remote lever feel and long-lasting performance - Kits include all the parts and enough housing to install with either internally or externally routed seatposts - Includes heat-shrink shims for use at the cable clamp to ensure compatibility with most cable-actuated seatposts and remote levers - Flexible housing construction improves performance with internal routing and tight housing bends - 0.8mm cable and FLEX-SL housing are for use only with dropper seatposts What's Included: - 1x 1700mm FLEX-SL Dropper Housing - 1x 2000mm Pro Polished Dropper Inner Cable - 2x Sealed Alloy End Caps - 2x Lined Alloy End Caps - 1x Heat-Shrink Shim - 1x Cable Tip - 1x 5G Tube Top - 1x Rotating Hook