29-Inch

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Eliminator GRID TRAIL 2Bliss Ready T9 tire features a tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator extremely predictable on soft to hardpack trails. It's perfect for enduro and E-bikes where versatility and confidence are key. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the high-dampening GRIPTON T9 compound rebounds slowly to grip and stick to the ground for total traction and control. - 29 x 2.3, psi 25-50, approximate weight 975g - 29 x 2.6, psi 20-40, approximate weight 1050g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60tpi tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Compound: GRIPTON T9

Specialized's Ground Control GRID is an exceptionally versatile trail tire. CAD engineered knob shapes strengthen knob structure for optimum braking and traction, but keep knob surfaces adaptable for best ground control. The GRIPTON compound helps make this the perfect choice for epic trail rides in any condition. Specialized recommends GRID tires for anyone seeking the utmost in flat and sidewall protection. - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 29 x 2.1" psi 25-50; approximate weight 710g - 29 x 2.3" psi 25-50; approximate weight 810g

The Hardrock'R is a long lasting tire with an aggressive, yet smooth rolling, tread with multi-directional knobs that are sure to improve traction and cornering over mixed terrain. And with the added benefit of Flak Jacket flat protection, you'll be sure to hit it all with confidence and control. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 29 x 2.0", PSI 35-65, approximate weight 1000g

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T9 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready.

The Renegade Control 2Bliss Ready T5 is perfect for fast accelerations, climbing in hard-pack terrain and podium finishes. Our fastest-rolling cross-country tread receives an elevated shoulder height to confidently carry speed through turns. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 615g - 29 x 2.35", PSI 25-50, approximate weight 645g

The ultimate tire for bikepacking and gravel adventures – and recipient of Bikepacking.com’s coveted ‘Gear of the Year’ award for the ‘Best New Component.’ Developed together with bikepacking legend Lael Wilcox, the Fleecer Ridge measures 29 x 2.2 (or 700C x 55 mm), making it a perfect fit for bikepacking bikes. We name our tires after the passes that inspire them: Fleecer Ridge is the toughest climb on the incredible Tour Divide that traverses the Rocky Mountains from Canada to the Mexican border. On a ride that long, you’ll need a tire that can handle a huge range of conditions, from deep snow and mud via fast gravel to pavement as you descend into towns to resupply. The Fleecer Ridge grips like a knobby when conditions get tough. On pavement, it rolls like a slick tire thanks to its large and strategically placed knobs that don’t squirm and always put the same amount of rubber on the road. The Fleecer Ridge is the world’s first bicycle tire with noise cancellation. The Standard casing is comfortable and fast, yet also strong to withstand considerable abuse. The Endurance casing is reinforced for extra sidewall protection and puncture resistance, while retaining the speed and comfort for which Rene Herse tires are famous.

At 48 mm wide, the Hatcher Pass hits the sweet spot between narrow gravel tire (38 mm) and mountain bike volume (55 mm) – ideal for the latest generation of gravel and all-road bikes. Named after Lael Wilcox’s favorite road in Alaska, this tire perfect for Hatcher Pass: The front side of the climb is paved and leads to Independence Mine (an abandoned gold mine that is now a state park). The back side is dirt. In August and September there are fields full of wild blueberries near the top. The Standard casing is comfortable and fast, yet also strong to withstand considerable abuse. The Endurance casing is reinforced for extra sidewall protection and puncture resistance, while retaining the speed and comfort for which Rene Herse tires are famous.

A road-centric knobby? A dirt-ready road tire? You decide! At 48 mm wide, the Oracle Ridge hits the sweet spot between narrow gravel tire (38 mm) and mountain bike volume (55 mm) – ideal for the latest generation of gravel and all-road bikes. We’ve developed the Oracle Ridge together with bikepacking legend Lael Wilcox, and we’ve named it after one of Lael’s favorite routes: Oracle Ridge is a beautiful gravel climb outside Tucson, AZ, which connects to the backside of Mount Lemmon for an ultra-fast descent on pavement. On the gravel climb, this tire grips tenaciously thanks to its large and widely spaced knobs. On the descent, it corners like a slick thanks to its large and strategically placed knobs that don’t squirm and always put the same amount of rubber on the road. The Oracle Ridge features our noise cancellation technology. The staggered tread blocks create overlapping noise frequencies that partially cancel each other. The Oracle Ridge’s speed, grip and lack of noise make you forget you’re riding a knobby – until you hit some loose or muddy ground and appreciate the extra grip. The Standard casing is comfortable and fast, yet also strong to withstand considerable abuse.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

Introducing the redesigned Maxxis High Roller II, offering better braking and more consistent feel. The open and aggressive tread design gives the High Roller II excellent soil penetration and mud clearing ability. A square profile provides a solid, consistent feel across the knobs, and modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. When gravity pulls you downhill, rely on the High Roller II to keep you upright. - Tubeless Ready - Folding bead

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Ikon is a lightweight, high-volume XC tire that rolls fast and has ample tread to provide secure traction in varied conditions. - Ramped center knobs roll fast and provide excellent traction for climbing and braking - Progressive shoulder lugs deliver secure traction in the corners - Intended use: hardpack, loose, loose over hard, medium - MaxxSpeed is a high-silica content compound that reduces rolling resistance while also enhancing traction in wet conditions - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Continental Mountain King Tires - All-around performer with uniformly spaced aggressive tread for reliable grip and handling

Bontrager's World Cup-winning downhill tire gives you incredible braking control and traction at high speed over aggressive, loose, rocky terrain, wet or dry. - A downhill tire that excels in loose, rocky, and wet conditions - Center knob tie-bar increases braking traction - Dual-step shoulder knobs for high lean angle traction - Open tread spacing is self-cleaning - Dual-Ply multi-layer casing adds stability for heavy-duty DH tires with added butyl layer to prevent flats - 60 TPI - Maximum pressure: 50psi - ETRTO: 64-622 - Weight: 1440g

An all-around trail tire that provides grip and speed in mixed conditions from rocky desert to high alpine. THE GOOD KIND OF TACKY Gunnison Pro XR is a durable all-around trail tire that offers grip and speed in mixed conditions. Pro XR Construction provides a 60TPI casing paired with sidewall puncture protection while a trail-specific dual-compound features a harder center to maintain straight line speed with medium shoulder knobs that bite when cornering. PRODUCT DETAILS - An all-around trail tread that provides grip and speed in mixed conditions - Pro XR Construction: 60TPI casing with sidewall puncture protection - Trail Dual-Compound: medium center and soft shoulder - Tubeless Ready (TLR) for easy tubeless setup and puncture protection