Pedals

This is the factory pedal set for Aventon ebikes.

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 100 x 100mm (Small) - Platform dimensions: 114 x 114mm (Large) - Small recommended for shoe sizes: 3-10 (US M) // 37-43.5 (EU)

The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap. - Thin, concave profile - 13.5mm to 15.5mm pedal body height - One-piece replaceable traction pins, 10 per pedal - Upgraded, fully serviceable IGUS bearings and seal system - Forged SCM 435 Chromoly Steel spindle - Optimal size-specific surface area - Platform dimensions: 114 x 114mm - Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g

Put your foot down! Upgrade your ride with Electra replacement pedals. Clipless, casual, cool. Product details: - 9/16" fits most bicycles with three-piece cranks - Made of nylon

Get precision power for all your rides. The Rally™ RK110 power meter pedals for road (compatible with LOOK KEO cleats) provide accurate power data and allow you to easily swap to Rally™ XC110 off-road pedal bodies. Rally RK110 features a single power sensor to track total power and cadence, with the option to upgrade later to dual sensing. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ RS110 power meter pedals for road (compatible with SHIMANO SPD-SL cleats) provide accurate power data and allow you to easily swap to Rally™ XC110 off-road pedal bodies. Rally RS110 features a single power sensor to track total power and cadence, with the option to upgrade later to dual sensing. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ XC110 and XC210 power meter pedals for off-road (compatible with SHIMANO SPD cleats) provide accurate power data and allow you to easily swap to Rally™ RS110, RS210, RK110 or RK210 road pedal bodies. The Rally XC110 models have a single power sensor and the option to upgrade later to dual sensing. The redesigned, all-metal pedals offer more clearance and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Get precision power for all your rides. The Rally™ RK210 power meter pedals for road (compatible with LOOK KEO cleats) provide accurate power data and allow you to easily swap to Rally™ XC210 off-road pedal bodies. RK210 models are dual sensing for additional metrics, including left/right balance and more. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ RS210 power meter pedals for road (compatible with SHIMANO SPD-SL cleats) provide accurate power data and allow you to easily swap to Rally™ XC210 off-road pedal bodies. RS210 models are dual sensing for additional metrics, including left/right balance and more. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ XC210 power meter pedals for off-road (compatible with SHIMANO SPD cleats) provide accurate power data and allow you to easily swap to Rally™ RS210 or RK210 road pedal bodies. XC210 models are dual sensing for additional metrics, including left/right balance and more. The redesigned, all-metal pedals offer more clearance and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ RK210 and XC210 power meter bundle includes a set of road pedal bodies (compatible with LOOK KEO cleats), off-road pedal bodies (compatible with SHIMANO SPD cleats) and dual-sensing power sensors. With this bundle, you can have a power meter for every bike by swapping the power sensor between pedal bodies and bikes. The RK210 and XC210 pedals are dual sensing for cycling dynamics metrics, including left/right balance and more. The redesigned road pedals are made of carbon for reduced weight and enhanced durability. The redesigned, all-metal off-road pedals offer more clearance and enhanced durability. These pedals are rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

Get precision power for all your rides. The Rally™ RS210 and XC210 power meter bundle includes a set of road pedal bodies (compatible with SHIMANO SPD-SL cleats), off-road pedal bodies (compatible with SHIMANO SPD cleats) and dual-sensing power sensors. With this bundle, you can have a power meter for every bike by swapping the power sensor between pedal bodies and bikes. The RS210 and XC210 pedals are dual sensing for cycling dynamics metrics, including left/right balance and more. The redesigned road pedals are made of carbon for reduced weight and enhanced durability. The redesigned, all-metal off-road pedals offer more clearance and enhanced durability. These pedals are rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 350mm² - Platform width: 57mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

Compatible only with Keo Blade 4th Generation / Keo Blade Power. To identify if your model is 4th generation, check the front plate — it should consist of three separate parts. The LOOK Upgrade Keo Blade Vision is the simple, research-validated solution to enhance your visibility and safety using the pedals you already ride and love. Installation is quick and easy, taking less than two minutes.

The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Composite - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 182g - Weight (pair + cleats): 415g - Float angle: 6° - Release angle: 13°

Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Carbon - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 125g - Weight (pair + cleats): 312g

The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 175g - Weight (pair + cleats): 400g - Float angle: 6° - Release angle: 13°

KEO BLADE CARBON pedals feature a Chromoly axle and stainless steel bearings for extreme reliability. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals are ready for the ride. - New leading edge profiling for increased aero dynamics and reduced drag - Improved sealed spindle design to resist water intrusion with dual sealed steel bearings and 1 needle bearing - Better retention lever durability compared to previous design - Easier clip-in rotation due to improved weight balance - 3-part high grade stainless steel contact points for higher impact resistance and durability - 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure - Easy clip in/out with composite blade retention 8 (installed) - Carbon Body, Chromoly + Spindle - KEO cleats included