Bike Components

Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

Cleat Wedges fit between cleat and shoe to provide better alignment, reducing knee and foot pain. · Includes 8 wedges (install between cleat and shoe) · Improves comfort and power · Better alignment reduces knee and foot pain

Enjoy the power and confidence of disc braking on the road. The tubeless ready Affinity Elite TLR Disc wheel offers consistent braking and all condition performance for discerning riders. •Stacked Lacing provides a better spoke bracing angle for a stiffer wheel •TLR rims allow for quick transition to tubeless systems •OSB reduces wheel dish, improving stiffness and stability •Interchangeable axles for compatibility with more frames and forks (sold separately) •6061 aluminum rim with 23mm/17.5mm width (outside/inside), DT 14/17G spokes •Includes: TLR rim strip, TLR valve stem, internal cam quick release •No rider weight restrictions

The bar with a flare for adventure! The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. 13-degree flare allows for more control in the drops Custom-butted, lightweight 6061-T6 alloy construction Shorter reach and wider flare allows for confident handling and easy access to controls Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing Laser-etched brake lever position lines for spot-on control setup Compatible with clip-on aero bars

Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. Product details: Replacement freehub body Compatible with select Rhythm and Line wheels

-Replacement freehub body -Compatible with select Aeolus Pro, Aura, Race Lite, and -Paradigm Comp wheels -End cap sold separately

The new Chorus rear derailleur benefits from the same technology and design of top-end Campagnolo products, incorporating the sophistication and performances of the 12-speed Super Record and Record. With just a few changes in the materials used for its construction, like the external plate and derailleur cage in aluminum, the Chorus version produces exactly the same performance as the two more expensive groupsets with the addition of just a few extra grams. Chorus brings with it the same technology as the next level up, like the new optimized trajectory on bigger cassettes and fantastic 3D EMBRACE technology. The latest evolution in Embrace technology not only keeps the rear derailleur vertically aligned in the perfect position for each sprocket, it now makes the upper pulley wheel advance perfectly in the direction the bike is advancing. 3D EMBRACE technology and 12-teeth pulley wheels makes this rear derailleur suitable for all cassettes as the distance stays optimum on each individual sprocket, regardless of the cassette selected.

Durability And Value Cane Creek’s 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

Carbon seat post (0mm offset) for R5 frames 2017 and newer. Saddle clamp hardware not included

Hub: Reliability meets simplicity, exactly according to this credo the 350 hub was developed. The simultaneous engagement of the ratchets and the resulting large contact area provides the aimed reliability. The plugged construction allows easy maintenance without the need of tools. Adaptation to different axle standards or modification of the engagement angle is also possible in a few manual steps. MATERIAL Aluminum FREEHUB SYSTEM Ratchet System 18 Rim: DT Swiss XR 361 black 29er Chiseled like an elite cross country racer and tough and wide, ready for trail action. That's the XR 361. Thanks to our exclusive PHR nipple-spoke interface which distributes the loads on a big area of the rims surface, the wall thicknesses can be kept really low to bring down the rotational mass on your bike as low as possible. Achieving a simple goal: To go elite-rider-fast. Weight: 410g Rim joint: welded Brake type: Disc brake Color: black Rim dimension [mm] : 622x22.5 ERD [mm]: 607 Inner width [mm]: 22,5 Outer width [mm]: 26 Height [mm]: 18 Valve hole: Presta 6,5mm Max. spoke tension [N]: 1200

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss's Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

DT Swiss SRAM XDR replacement freehub body. Fits 180, 240, 350, 440 hubs, 12x142mm, TA end cap included.

No words needed - just google "Ex 471 Leogang World Cup". Comes with Squorx nipples and rim washers.

The GE1 Evo Factory was developed for the toughest races in the Enduro World Series. It was an evolution of the successful GE1. The level of performance is enhanced by the factory rubber’s increased durability, grip ability, and texture layout.

Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth

HED Belgium alloy rims make any custom wheel build that much sweeter. With a 23mm external width of the Belgium C2, you can add tire volume, smoothness, and rolling speed to any bike or hub set, even older bike models with less tire clearance. All Belgium rims feature a welded rim joint and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer. Belgium C2 clincher Tire Type: Clincher Rim Width (External): 23mm Rim Depth: 24mm Hole Count: 20 Color: Black Brake Track: Machined (silver) Wheel Size: 700c Weight: 455 grams Max Pressure: 100psi ERD: 592mm

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

The Loop Aluminium 710mm H-Bar is our most popular H-Bar. If you're new to the H-Bar, this is the model that we tend to recommend first because its loop design has the widest range of hand positions, its aluminium construction gives the best value, and its 710mm width not only gives you the full range of positions, but allows you to cut it down to the original 660mm width (using the laser-etched cut guides) if you decide that you want something narrower. The cross bar on the Loop H-Bar sweeps forward to allow the levers to go behind the cross bar instead of in front. This gives longer uninterrupted hand positions and will allow trigger and grip/twist shifters to fit on the rearward extensions (unlike the original H-bar). The continuous front loop of the bar enhances stiffness and is good for additional aero hand positions and mounting lights, GPS devices etc. This bar provides comfort and power with an impressive weight. With the levers in the optimum position you get a wide range of hand and body positions, from fully upright at the ends of the grips, to a tucked aero position when resting your forearms across the crossbar and loop. In between these extremes, there are many unique and useful positions, making this a true multi-position bar because you'll actually find yourself using all of the positions! The rearward extensions allow extra leverage and a wider hand position - be it for comfort or power. All H-bars are for a 31.8 stem and the crossbar is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength and weight savings. All H-Bars have a standard 22.2mm diameter grip area. Try wrapping the crossbar with bartape! You can wrap both the crossbar and loop (but it helps to leave a gap in the center of the loop to mount whatever gadgets you have), if you want to have the most hand positions!

Computer magnet specifically designed for Tracomp spokes. Tiny yet powerful magnet, compatible with any bike computer, designed to efficiently fit Mavic's carbon Tracomp spokes.

The Maxxis Assegai tire is named after the iron-tipped spear used by the Zulu people of South Africa. Greg Minnaar, a native of South Africa, thought it was a fitting name for a tire ready to do battle on the mountain. The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. When combined with Maxxis’ 3C MaxxGrip rubber compound, the Assegai offers predictable traction, even over slippery roots and rocks. - Wide Trail casing optimized for 30mm-35mm rims - 3C MaxxGrip rubber compound for unparalleled traction - Dual-ply downhill casing - Tubeless-Ready bead

The Maxxis Assegai tire is named after the iron-tipped spear used by the Zulu people of South Africa. Greg Minnaar, a native of South Africa, thought it was a fitting name for a tire ready to do battle on the mountain. The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. When combined with Maxxis’ 3C MaxxGrip rubber compound, the Assegai offers predictable traction, even over slippery roots and rocks. - Wide Trail casing optimized for 30mm-35mm rims - 3C MaxxGrip rubber compound for unparalleled traction - Dual-ply downhill casing - Tubeless-Ready bead

•This version for Shimano™ Hollowtech cranks only. •Forged & machined heat-treated 7075 T6 Aluminum •Steel radial bearing or Ceramic Angular option •68mm Road version / 73mm MTB Version •For BB30, PF30, and Specialized Road OSBB frames •CERAMIC Option:Angular contact steel race, ABEC5 Assembly, Grade5 Ceramic balls

Designed to be a proper BB for installing SRAM GXP/ISIS2 cranks in either BB30 or PF30 mountain frames. This includes cranks from SRAM/TRUVATIV/QUARQ, and Oval Concepts. Our patent pending design keeps the cartridge bearings outboard of the frame right on SRAM spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with. Simply press in the longer non-drive-cup, then the shorter drive cup threads into it. As the drive cup threads in, our trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and our collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies. SRAM BB30/PF30 conversion bottom bracket Forged & machined heat-treated 7075 T6 Aluminum Enduro 2437 Drive /2237ER Non-Drive steel bearings For 73mm BB30 or PF30 mountain frames Not for BBRight,BB386EVO, BB86, BB92 frames SRAM: GXP SRAM/Truvativ/Quarq/ISIS2 steel spindle, and also Oval Concepts 400/500/700series cranks Made with Enduro bearings and high grade grease Model: SRAM mountain Press tool, and 2 Praxis M30 BB tools required for installation Interface: 24/22mm stepped spindle Shell: BB30/PF30 (includes sleeve for BB30 installation) Width: 73mm Color: black

For Specialized ebike models with ISIS motor/spindle : LEVO, Turbo LEVO, KENEVO, VADO, COMO with steel ISIS spindle/spline. NOTE– These are NOT for the new 2020 Levo SL and Creo with SL 1.1 motor with alloy M30 spindle/spline.

The Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honor it, we named our new top-level crank Zayante, after the fabled redwood-covered climb so-named – secret training ground for many local pros. The Zayante Carbon is the ultimate marriage of lightness, stiffness and versatility.

This upgrade kit allows you to pair 11 speed mechanical SRAM shifters with a 12 speed Eagle™ derailleur and cassette. This is the neatest solution on the market to gaining all the performance advantages of a wide-range 1×12 drivetrain on a gravel, road or touring bike without the expense of electronic shifting. You can fit this kit if your chain stay/seat stay cable stop is over 70 mm from the dropout. If it is under 70 mm from the dropout you’ll need the 1×12 Upgrade Kit – Rear Cable Exit. As cyclists, we design the products we want on our bikes. The Ratio 12-Speed Upgrade Kit allows you to operate an Eagle™ derailleur with your existing SRAM 11-speed shifters, gaining an unbeatable 500% or 520% range and 12 evenly spaced gears on your gravel, road or touring bike. For reference, a traditional 50/34 compact chainset with 11-28 cassette provides only 374% range. IMPORTANT: To fit this kit your chain stay or seat stay derailleur cable stop must be over 70mm from the centre of the dropout. For those bikes where it is less than 70mm choose our 1×12 Wide Upgrade Kit – Rear Cable Exit. In your kit you will find: Ratio 12-speed ratchet, with shift spacing specially designed for Eagle™ cassettes Ratio cable fin, replacing the existing cable fin on an Eagle™ derailleur Ratio cable adjuster, providing indexing ability on a mountain bike derailleur Spare cable fin circlip M2.5 screw for shifter ratchet replacement Ratio chainstay sticker To use this kit you will need: SRAM 11-speed shifters from the Red™, Force™, Rival™ or Apex™ groups or the 10-speed S-700 shifters. An Eagle™ derailleur from the XX1™, X01™ or GX™ groups. The kit is NOT COMPATIBLE with SX™ and NX™ derailleurs as the cable fins on these derailleurs are riveted in place. A SRAM Eagle™ 12 speed cassette. We can’t confirm that aftermarket cassettes will perform properly with your drivetrain. A 12 speed chain for SRAM Eagle™ drivetrains. A 1×12 speed compatible chainring.

The Bon Jon Pass is our Goldilocks tire: at 700C x 35 mm, it fits bikes that have extra clearance around the Stampede Pass (32 mm), but not enough space for a Barlow Pass (38mm). Rene Herse names tires after the passes that inspire them: Bon Jon Pass is a remote pass on the Olympic Peninsula. The moderate gradient allows you to let your bike fly, and these tires are perfect for the smooth gravel surface of the pass and for the chip-sealed asphalt that covers the approach. The Standard casing is comfortable and fast, yet also strong to withstand considerable abuse. The Extralight casing takes the performance, comfort and feel of your bike to an entirely new level.

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) Bearing Type: DT Swiss Sealed Steel Cartridge Bearings Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm Max Pressure: 130psi Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand-built Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) Bearing Type: DT Swiss Sealed Steel Cartridge Bearings Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm Max Pressure: 130psi Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand-built Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority. Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub Bearing Type: DT Swiss SINC Ceramic Bearings Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm Nipple: DT Swiss Hex Prolock Al 2.0x14mm Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand built at every step, from rim layup to the last nipple turn. Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g

Replacement disc brake caliper suited for SRAM CODE R B1/RSC A1 non CPS disc brakes. The hydraulic hose and lever are not included.

It's the final piece in the drivetrain puzzle, and paired with SRAM RED eTap and RED rear derailleurs, SRAM's XG-1190 cassette delivers ultra-fast, ultra-quiet shifts that will always put you in the right gear. - Compatible with SRAM RED eTap, RED, Force, Rival, Apex - Weight: 151 grams (11 – 25T), 185g (11 – 30T), 196g (11 – 32T) - Material High grade tool steel cog cluster, Heat treatment process, Heat treated aluminum lowest range cog, Elastomer rings - Speeds: 11 Gear Ratios: - 11 – 25T: 11,12,13,14,15,16,17,19,21,23,25 - 11 – 26T: 11,12,13,14,15,16,17,19,21,23,26 - 11 – 28T: 11,12,13,14,15,16,17,19,22,25,28 - 11 – 30T: 11,12,13,14,15,17,19,21,24,27,30 - 11 – 32T: 11,12,13,14,15,17,19,22,25,28,32

True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included

Santa Cruz Reserve wheels are built on the highest quality carbon rims. Confidence in the design and strength of the Reserve wheels is backed up by a lifetime warranty. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from Santa Cruz's experience of knowing what riders need at every level—from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Santa Cruz's Reserve wheel engineers have rewritten the future of tubeless systems with the introduction of the all-new Fillmore valve, a completely new take on tubeless valve designs. The patented Fillmore valve represents a game-changing leap forward in technology, with a high-flow design that eases tubeless set up and eliminates the traditional, delicate, clog-inciting valve core of yesteryear. -High Flow: 3X air flow makes seating tires a snap -No Clog: Eliminates clogging and busts through dry sealant -Micro-Adjust: Airs down to the perfectly dialed tire pressure -Direct-Inject: Coreless design for no-fuss injection of sealant Compatibility: 50mm Fillmore Valve - Rim Depth - 18mm to 28mm Lifetime Gaurantee

The Diva Gel Superflow, Selle Italia's single most popular saddle, is designed and produced specifically for the needs of women riders and it delivers unparalleled comfort and performance. It is part of the Sportouring group, for bike aficionados who appreciate durability, ride quality, comfort, and style. Built upon TI 316 rails, which are lightweight yet strong, the woman-specific Diva Gel Superflow features a wide central “Superflow” cut-out for pressure relief, plus it has increased padding that’s topped with a vibration-absorbing layer of gel. A technical microfiber cover ensures great looks and long term durability. The Diva Gel Superflow perfectly suits women’s needs in both style and technical characteristics, and comes in two sizes, S3 (135 mm wide; 275 g) for narrow intertrochanteric distance, and L3 (152 mm wide; 285 g) for wide intertrochanteric distance, as measured by the idmatch Smart Caliper system.

NOVUS BOOST TM Superflow, the new version of the unmistakable quality of Novus at a competitive price. The NOVUS BOOST TM Superflow represents the ideal saddle for anyone who is searching for performance and comfort at a competitive price. The benefits of the Superflow technology, the double-density padding and the rear inserts in Nubuk, make this saddle unique of its kind.

SHIMANO - Square Type Bottom Bracket - MTB - English Thread SHIMANO quality/performance cartridge bearing square bottom bracket Series: Shimano Tourney TX800 Series Fits JIS square-taper cranksets Hollow spindle Crankarm fixing bolts sold separately

Shimano Deore XT M8100 Brake Lever and M8120 Hydraulic Disc Brake Caliper were made to deliver high-performance braking for trail and enduro riding by using four pistons to deliver the stopping power you need. Features: Brakes are pre-bled Adjustable reach Specifications: Mount Type: Post Mount Pistons: 4 Hose Length: 1000mm (Front), 1700mm (Rear) Pad Compound: Metallic Hydraulic Fluid: Mineral Oil

The Shimano XT M8100 series of derailleurs brings a new level of drivetrain silence thank to decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with SHIMANO's new 12-speed cassettes boosts range. Features: Fast and precise shifting performance optimized to take on any trail. Silent drivetrain in all gear positions. Stable drivetrain on rough terrain. Faster and shockless shifting.

Shimano GRX FD-RX810 rear derailleur features an integrated chain stabilizer to keep the shifting smooth and precise over a variety of terrain. Features: Adjustable chain stabilizer prevents chain slapping and drops Switch stabilizer ON/OFF to match the terrain Gravel-tuned clutch tension Specifications: Weight: 255g Capacity: 40T Max Low: 34T Speed: 11

Genuine Shimano replacement part. Compatible with the following Shimano SPD-R Pedals: - Shimano Dura-Ace PD-7701 & PD-7700 - Shimano Ultegra PD-6601 & PD-6600 - Shimano 105 PD-5500 - Shimano PD-R535

Shimano's Ultegra-level WH-RS770 C30 TL wheelset represents a solid value in a relatively light, tubeless compatible carbon wheelset. The wheel is tubeless compatible with a tubeless specific tire, but can be run using a standard clincher tire and tube. Good choice for an economical wheelset that has great technology and best of category performance. The RS770 C30 TL wheels have a differential-height carbon laminated alloy rim, which is designed to offer a responsive handling and a smooth ride quality. Both rims have a 17mm internal rim width with external width coming in at 23mm. The carbon-alloy laminate construction improves aerodynamics and greatly increases both torsional and lateral wheel strength. Shimano's familiar wide flange hubs help to increase lateral rigidity and power transfer and are completely serviceable. Standard 100x12mm and 142x12mm thru axles with straight pull spokes and Center Lock rotor mount complete the package. Details Differential height carbon-alloy laminate construction rims 24mm height front/28mm height rear Wide flange Ultegra-level hubset 100x12mm/142x12mm thru axles standard Straight pull spokes Shimano Center Lock compatible Tubeless-ready rims work with both tubeless and non-tubeless 24 spokes laced 2x front and 2x/Radial rear Weight: 1638 grams

Satin, 0mm setback

Mulefut 80SL V2 27.5-inch Rim STR Tubeless Ready Disc only Pinned Presta Valve Drilled Size: 27.5in (584) Outer Rim Width: 80mm Inner Rim Width: 74mm Hole Count: 32 All Hubs Feature: Sealed Cartridge Bearings Accepts 6 bolt disc rotor Thru-Axle not included Formula SL-150 Front Hub Fits 197mm x 12mm Thru-Axle frames Accepts common Shimano style mountain bike cassettes (Does not fit any cassette with a 10t small cog) Wheel weight - Formula SL-1971 XD 11 / 12 speed Thru-Axle Rear Hub 14g Black Stainless Steel Spokes Brass nipples

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Avid: - Elixir 9,5,3,1,CR,R - SRAM - XX - XO - DB 5,3,1 - Level TL,T,Level

TRP's Hylex RS is a full hydraulic single speed disc brake system for road and CX. Designed for single speed aficionados who want simplicity without sacrificing braking performance. Ergonomic and perfectly sized hoods create a natural extension from the rider’s hands to the bike. It sports an integrated master cylinder within the low-profile, ergonomically shaped lever body. A drilled out lever blade shaves weight and improves grip. Rotor and adaptor sold separately. Compatible with Shimano M525/M515 pads.

Replacement hoods for your RRL levers. Colors: Black or Gum Fits all RRL levers Comes in a set of left and right