Parts & Accessories

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT Swiss Rear End Caps - QR x 135/142mm

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Aluminum

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

Aluminum

Includes two star ratchets, two springs, and special grease.

Thru-axle assembly for Diamond and Sapphire model suspension forks.

A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 

Replacement nipples for installing spokes on ENVE carbon fiber cycling wheels. Rim, spoke, and hub won’t stay together on their own. These are the only nipples you should use on our wheels. - Material: Brass - ENVE nipples are required in order to keep your wheel warranty valid

- Freehub Body: Campagnolo N3W - Freehub Compatibility: ENVE - Speed: 13

Using Easton End Caps allows you to utilize the versatility of Easton Wheels. Easton wheels are interchangeable with a variety of wheel mounting standards.

Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Industry Nine Torch Road end caps allow conversion to a variety of rear axle standards. - Includes two end caps

OEKMFH214 1/1 - MTN - MS - Freehub Complete Kit w/ bearings, pawls, springs & seal (includes DS 12x148 endcap) Convert or replace your existing 1/1 mountain freehub body with this complete Micro Spline 12 spd kit. Includes everything you need to swap the freehub and get riding! Compatible With 1/1 mountain rear hubshells Includes 1 - 1/1 Micro Spline freehub body shell 1 - bearing spacer 1 - 152610 bearing 1 - 6802A3 bearings 6 - 1/1 pawls 6 - 1/1 springs 1 - freehub body seal 1 - DS end cap

Kit w/ bearings, pawls & springs Replace your existing Torch mountain freehub with this complete XD 11/12 speed kit. Compatible With: Torch mountain rear hubs Includes 1 - Torch XD freehub body shell 1 - bearing spacer 1 - 31803 bearing 1 - 61803 bearing 6 - Torch springs 6 - Torch pawls 1 - freehub body seal

Replacement freehub kit for Hydra hubs

Computer magnet specifically designed for Tracomp spokes. Tiny yet powerful magnet, compatible with any bike computer, designed to efficiently fit Mavic's carbon Tracomp spokes.

Get rolling again with a replacement 10-speed freehub body for Mavic wheels.