Other

The ENVE Clip-On Extensions share the same design features as the SES Aero Bar, but in a simple, function-first package that can be installed on any road bike with a 31.8mm clamp diameter clip-on-compatible handlebar. The extensions can be cut to a broad range of lengths to accommodate virtually any rider’s desired position. The extension itself can be cut to either a J-bend or S-bend shape. Because of the 31.8mm clamp, the clip-ons can achieve very wide pad spacing for broad-shouldered athletes seeking comfort for the long haul. The Clip-On receiver is made from 100% uni-directional carbon fiber, as are the pad carriers. For road riders looking to dabble in triathlon, the Clip-On Extensions provide a more aerodynamic position than road bars alone, without having to make a full commitment to a TT or Triathlon bike.

- Wrist pressure relief ergonomics - Multi adjustable brackets - Multi position wide armrests - 1cm soft foam arm pads - Weight: 241g (Ski-Bend), 237g (S-Bend) - 22.2mm extension clamp diameter - Compatible with 31.8mm handlebars

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.

THIS KIT IS SPECIFIC TO THE 2019 AND 2020 YETI SB130, MEDIUM FRAME SIZE! Preserve the stock look of your bike! Whether you're applying to a new bike or one you've ridden for years, a transparent Antik™ will protect your carbon frame and let your bike's good looks shine through. Our logo is subtly printed in semi-transparent ink to remind you of the protection. Antiks are available in gloss or matte finish. We recommend matte for a dull finish frame; gloss for a shiny finish. Bike-specific Antiks are pre-sized and include relief cuts to make installation a breeze. We've done all the trimming for you. Every Antik includes Shenanigans to protect your handlebars, fork, and crank arms, and an installation tool. Please note: these pictures show examples of transparent Antiks on different bikes. If you order a bike-specific Antik, it may be for a bike not included in these pictures. Antiks provide the following features: Pieces are pre-cut for your specific bike (we've done all the work for you!) Substantial scratch protection for your carbon frame (top tube, down tube, head tube, chain stays, and seat stays) to guard against stray rocks, sticks, and inevitable transport abuse Fast installation with no need to disassemble your bike (installation guide included with every kit) Easy, bubble-free application (just peel & stick, and easily reposition pieces until you find the perfect fit) Corner and edge coverage provides comprehensive protection Won't peel or yellow over time. Lobster Tail Technology™ (LTT) relief cuts conform to curves Wrinkle Avoidance Beans™ (WABs) prevent wrinkles around contours Gloss or matte finish Weight: less than 90 grams for a full kit Designed and produced in the USA (in Golden, Colorado)

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

This upgrade kit allows you to pair SRAM 11 speed mechanical shifters and 2x-specific Exact Actuation™ derailleur with a 12 speed eTap™ AXS™ cassette and 12 speed Flattop™ chain. You’ll gain all the advantages of greater gear range and closer gear ratios without the expense or weight of electronic shifting. Using a 2×12 Road Upgrade Kit gives you the following advantages: Greater gear range and/or closer gear ratios than 11 speed Lower cost than wireless electronic. Save $1786 on a Force™ disc build; $1170 saving on a Force™ rim brake build* Lower weight. Save 382g on a Force™ disc build & 222g on a Force™ rim brake build** No batteries to keep charged The reliability and serviceability of mechanical shifting

It’s tough to find space for a remote that looks good and gives the rider full control. The TwistLoc remote makes it easy to control your suspension while on the go. Twist back to lock, twist forward to release – on forks, rear shocks, or both in tandem. With a consistent grip size and light-touch action, the TwistLoc maximizes efficiency while keeping your hand safely on the bar. - Curved “CRVD” vs. and straight “STRT” cable options (see photos for reference) - Encouraged for XC, Trail, and Enduro usage - Easy action - Twist to lock, push button to release - Fixed grips included

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T

SHIMANO - Junction A - E-TUBE - Under Stem Mount - 3-Port SHIMANO's SM-EW90-A 3-port Junction A mounts neatly to the bike stem and connects with E-TUBE wires from DI2 shifters and the downtube junction wire. The SM-EW90 junction box features an integrated battery level indicator, charging port, and gear index setup switch.

- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!

ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!

Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. - Can be mounted above or below handlebars - Great match for SRAM 1x drivetrains - Tall clamp allows OneLoc to easily fit non-SRAM components

Upgrade or refresh your bike. - Affordable alloy seat mast cap - Direct fit on all Trek road bikes with round seat masts - 2-bolt design offers independent setback and tilt adjustments - Includes 7mm round saddle clamp ears

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

Fit Kit SET811 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 168—180mm thru axle with 1.75 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

UPLND STOKE's best selling protection just got better! One kit. Any bike. Give your bike the protection it deserves. The Hijinx™ 2.0 will fit any mountain bike frame and provide substantial scratch and light impact protection to keep it looking new. Available in gloss or matte finish, these transparent kits allow you to ride harder and worry less. Hijinx kits contain modular chips to extend protection where you want it. Large pieces include relief cuts that contour around frame curves to make installation a breeze. UPLND STOKE analyzed more than 50 bike-specific kits to identify optimal shapes and sizes for each piece. Trimming may be required to fit some bikes, but they did most of the work for you. Be sure to add Shenanigans to protect your handlebars, fork, and crank arms! Hijinx 2.0 kits provide the following features: Substantial scratch protection for your carbon frame Easy installation (no need to disassemble your bike!) Dry, bubble-free application (just peel & stick, and easily reposition pieces to get the perfect fit) Won't peel or yellow over time. Lobster Tail Technology™ (LTT) relief cuts conform to curves Wrinkle Avoidance Beans™ (WABs) prevent wrinkles around contours Gloss or matte finish Weight: less than 100 grams for a full kit Proudly designed and produced in the USA (in Golden, Colorado) What's in the box: Frame protection material to cover your top tube, down tube, head tube, seat tube, chain stays, and seat stays, plus bonus patches to place where you want Each piece is labeled so you'll know what goes where Quick Installation guide Squeegee tool to assist installation

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

One kit. Any gravel or CX bike. Give your bike the protection it deserves. The Rangr™ kit will fit any adventure bike frame and provide substantial scratch from the road and frame bags as well as light impact protection to keep it looking new. Available in gloss or matte finish, these transparent kits allow you to protect your adventure steed against the dirt road grit and grime. Rangr kits contain modular chips to extend protection where you want it. Large pieces include relief cuts that contour around frame curves to make installation a breeze. Trimming may be required to fit some bikes, but UPLND STOKE did most of the work for you. Rangr kits provide the following features: Substantial scratch protection for your carbon frame Easy installation (no need to disassemble your bike!) Dry, bubble-free application (just peel & stick, and easily reposition pieces to get the perfect fit) Won't peel or yellow over time. Lobster Tail Technology™ (LTT) relief cuts conform to curves Wrinkle Avoidance Beans™ (WABs) prevent wrinkles around contours Gloss or matte finish Weight: less than 90 grams for a full kit Proudly designed and produced in the USA (in Golden, Colorado) What's in the box: Frame protection material to cover your top tube, down tube, head tube, seat tube, chain stays, and seat stays, plus bonus patches to place where you want Each piece is labeled so you'll know what goes where Quick Installation guide Squeegee tool to assist installation

The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated dropper posts - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post - Works with any mountain bike handlebar - Can be rotated to your preferred position

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear kit, 142x12mm Thru Axle - Mounting location: Rear kit - Attachment: Thru axle nut

The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.

An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup. **For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters