Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$8.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
$11.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
$24.99
Tubeless tires were supposed to mean the end of flats, but while flats are significantly reduced, they still remain a part of our life with tubeless setups. Stan's DART Tool aims to make the inevitable tear or large puncture quick to fix by plugging holes and instantly sealing flats. -STAN's solution to tears and punctures on your tubeless setup -Barbed plastic tip anchors into tire, won't tear rim tape -Flexible material conforms to puncture and bonds with sealant -Excess material wears off clean so you don't need to trim -Lightweight and compact for easy storing in your pocket -Two pre-loaded DARTs included in clear cap to keep clean
$9.99
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
$11.99
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$11.00
Since the 1960's all SILCA leather gaskets have come from the same leather converting house in the fashion district of Milan, Italy. For more than 5 decades the same supplier has cut these washers from the excess material left over from the production of exotic handbags, Italian luxury cars interiors, and high-fashion luggage. A small press is used to trim and pressure-form these leather washers into durable pressure gaskets. From a purely functional standpoint, inexpensive o-rings are most commonly used in this application, but no o-ring can match the smooth feel and zero-stiction action of a leather gasket. It is common today to find SILCA leather gasket pumps throughout the professional peloton (especially during the spring classics) as o-ring seal pumps struggle with heat and often are unable to seal once the pump barrel is hot from inflating more than a few wheels. What is it? The 731 Leather gasket fits SILCA pumps with 28mm inner diameter. Who's it for? The cyclist who appreciates a long lasting tool and is looking to bring their PISTA, PISTA PLUS and VIAGGIO pump back to like-new condition. -Fits 28mm internal diameter SILCA pumps -Made from finest quality full grain leather -Produced by hand on the same equipment continuously since 1960 -2.50mm thick leather -Hand-crafted in Milan, Italy
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
$17.99
If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike. - Designed with a low pressure range of 2-15 psi specific for fat bike tires - Durable case and crystal lens - Retains reading until reset - White face plate for easier reading - Compatible with Presta valves with removable core - Presta/Schrader adaptable head - Length: 120mm - Weight: 101 grams
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$5.49
Park Tool worked with 3M® to produce a self adhesive tube patch that stretches, flexes, twists, and turns right along with the tube. No messy glue, no bulky packaging. Lightly roughen tube with the included sandpaper, clean, apply patch, and you’re ready to go.
$147.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
$1.49
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
$9.79
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Each
Page 1 of 1