Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$10.16 $11.95 15% Off
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$96.99 $129.99 25% Off
Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. -20L capacity. -Easy-access pocket. -Fully padded laptop compartment. -Large front pocket. -Easy-carry handles. -Compatible with Coolcave pannier.
$32.99 $44.99 27% Off
Easy-access handlebar holder for a bottle, snacks, or other small items. Helps keep hydration and spirits up on warm, high-intensity days in the saddle. A cinch-and-release snowlock closure makes for easy handling and keeps contents in place on bumpy rides. Made from durable Vinylon with an all-around foam padding for structure and ease of use. Attaches to the handlebar post with up to three Velcro straps. Can also be attached to the webbing on the front of the Specialized/Fjällräven Handlebar Bag. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. -Semi-soft design in Vinylon F with foam padding and recycled nylon lining. -Single-hand operated cinch lock. -Front pocket in mesh fabric for energy bars or snack wrappers. -Eyelet in the base drains out water. -Fits bottles up to 75 mm in diameter. -Material- Vinylon F (100% vinylal)
$85.00 $100.00 15% Off
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$42.50 $50.00 15% Off
All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. Compatible with Globe Haul ST rear rack and Globe Front Rack. Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. Includes all required tools when purchased with the Globe Haul ST.
$51.00 $60.00 15% Off
Our Turbo SL Y-Charger Cable lets you simultaneously charge your Specialized SL Battery and Range Extender. Custom Y-split cable simultaneously delivers power to both the main internal battery and the SL Range Extender Battery. Length: 1000mm
$25.49 $29.99 15% Off
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
$2.55 $3.00 15% Off
This Duraflex™ Bladder Hose Clip is perfect to add to any existing 3/4" or 1" webbing OR get it with a 1" OneWrap Velcro™ strap and add it to anything. Single Clip has 1" slots and 3/4" slots. Split bar makes adding it to any existing webbing easy. Clip has the ability to rotate to any angle Option of 4.5" of OneWrap included at no extra charge. Great for our following products: Portero™ Backpacks Royale™ Hip Packs (needs the OneWrap strap) Lunch Box™ Handlebar Bags Chuckbucket™ Handlebar Bags (needs the OneWrap strap) SuperWedgie™ Frame Bag Half Pack™ Frame Bag Bodega™ Frame Bag
$2.55 $3.00 15% Off
This Duraflex™ Bladder Hose Clip is perfect to add to any existing 3/4" or 1" webbing OR get it with a 1" OneWrap Velcro™ strap and add it to anything. Single Clip has 1" slots and 3/4" slots. Split bar makes adding it to any existing webbing easy. Clip has the ability to rotate to any angle Option of 4.5" of OneWrap included at no extra charge. Great for our following products: Portero™ Backpacks Royale™ Hip Packs (needs the OneWrap strap) Lunch Box™ Handlebar Bags Chuckbucket™ Handlebar Bags (needs the OneWrap strap) SuperWedgie™ Frame Bag Half Pack™ Frame Bag Bodega™ Frame Bag
$30.59 $35.99 15% Off
Occam's flagship product brings to the trail a sleek design and incredible functionality. Safely and securely carry all of your repair equipment and rest assured that it’ll be there, ready and waiting, whenever you need it. X-Pac construction is durable and UV resistant BOA FIT SYSTEM provides fast, effortless mounting to anywhere on your frame Adjusts to fit nearly any bike in existence 28 grams — roughly equivalent to 1/8th of your favorite canned beer
$6.79 - $7.64 $7.99 - $8.99 15% Off
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
$8.49 $9.99 15% Off
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
$25.50 $30.00 15% Off
Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame
$25.50 $30.00 15% Off
Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame
$33.99 $39.99 15% Off
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - Carrier plate for rear racks that are not MIK ready. - Adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg
$12.74 $14.99 15% Off
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Page 1 of 1