Electronics

Brilliantly vivid. Effortlessly intuitive. The all-new ELEMNT ACE is our largest and most powerful bike computer. With touchscreen convenience, a super-sized display, and ride intelligence that takes care of the details, it simplifies the ride so you can focus on the journey ahead. The result is an experience that makes planning, navigating, and analyzing your performance easier than ever, allowing you to take on big goals and bigger adventures.

The all-new ELEMNT BOLT combines a race-ready design with a larger, high-contrast 2.3” display for crisp readability at any speed and in any conditions. Powered by the ELEMNT experience, its intuitive ride intelligence, smart navigation, and seamless connectivity make every interaction effortless—whether you're racing, training, or chasing your next PR. Built For Speed. - ELEMNT BOLT’s aerodynamic design minimizes drag, while its compact form factor keeps weight low without sacrificing the data you need to push harder. - BOLT makes getting where you need to go easier than ever with intuitive navigation that feels as familiar as your smartphone. See More. See Anytime. - A small screen shouldn’t mean small details. BOLT’s high-resolution 2.3” anti-glare display delivers crisp clarity in bright or dim conditions. Ride Fast. Ride Ready. - The all-new Ready-To-Ride Dashboard simplifies pre-ride setup, so you spend less time tapping through menus and more time riding.

Powerful, robust, and adventure-ready, the all-new ELEMNT ROAM combines a large, anti-glare display with touchscreen convenience and dynamic ride intelligence to make every ride effortless. With crisp, easy-to-read mapping, intuitive navigation, and smart features that handle the details before, during, and after your ride, the ELEMNT ROAM keeps you focused on the road ahead. Whether you're exploring new routes or pushing through an endurance challenge, the ELEMNT ROAM is always ready for your next big ride. See everything. Navigate everywhere. - ROAM’s larger 2.8” high-contrast display enhances visibility in any environment. Adaptive brightness and a redesigned user interface make key data easier to read at a glance. Smarter Mapping. Effortless exploration. - Navigation should be simple, not stressful. ROAM makes navigation simple with audible turn-by-turn guidance, detailed map layers, and intuitive routing. Control at your fingertips - Tap, pinch, zoom, swipe—interact with your ride like you do with your phone. ROAM’s responsive touchscreen makes it easy to adjust, scroll, and control your experience with precision. Ready to ride in seconds - Quickly set your activity, route, and workout in the all-new Ready-To-Ride Dashboard. Paired sensors, battery status, and key ride metrics are displayed at a glance.

Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. - Fits any stem - Weight: 0.2oz - Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini Note: BOLT loses aerodynamic advantage with this mount)

Our patent-pending integrated mount for the ELEMNT BOLT GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI compliant for connecting your ELEMNT BOLT to your bike for weigh-ins. Fits 31.8mm round bars Weight: 0.9oz Works exclusively with the newest ELEMNT BOLT

With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount. Weight: 0.1oz

Our patent-pending integrated mount for the ELEMNT ROAM GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI compliant for connecting your ELEMENT ROAM to your bike for weigh-ins. Fits 31.8mm round bars Weight: 1.55 oz (44g) Works exclusively with ELEMNT ROAM

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

Accurate, reliable, comfortable and connected, the Wahoo Trackr Heart Rate monitor offers athletes everything they need from a heart rate sensor to take their performance to the next level. Strap Length: Adjustable from 27" to 36" (68cm to 91cm) Maximum Chest: Fits up to 50" (127cm) chests Connectivity: ANT+ and up to three Bluetooth connections Supported Devices: iOS - iPhone, iPad, Mac, Android devices, Windows Battery: Rechargeable Lithium Ion Battery Life: Over 100 Active Hours

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty

Connects the Specialized SL Range Extender Battery with 2nd generation Turbo Levo SL Comp, Comp Carbon, Expert Carbon, and S-Works models. Custom connector with lock mechanism ensures a secure connection. Length: 145mm

-Connects the Specialized SL Range Extender Battery with all Turbo SL off-road bikes. -Custom connector with lock-mechanism ensures a secure connection. Length: 160mm

SL Range Extender Cable 285mm MTB

The new Turbo Connect Display (TCD) is the best way to view data on your Turbo. It not only displays basic ride metrics (speed, cadence, power, battery level, and time), but it also lets you toggle between modes. Its design, meanwhile, is rugged and clean, and it has multiple mounting options for either road or mountain setups. As for the latest version of the Mission Control App, you’ll find that it now has more features and is even more intuitive to use. It lets you custom-tune nearly every aspect of the bike with ease, monitor your power usage, control your range, perform basic system diagnoses, and record/upload rides. - Monochrome LCD display (black/white). - Screen Size: Height (40mm), Width (35mm), Diagonal (52mm), Display (2 inches) - ANT+ & Bluetooth modules for easy communication. - Sits centrally on the handlebars at the stem and has either a twist-lock or an optional theft-resistant lock. - Twist-lock can be turned on the handlebars, while the display also fits others popular mount options. - Protection standard IPX7 (suitable for splashes, rain, or snow).

Securely holds your Turbo Connect Display/Speedzone 2 computer. Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount. Left- and right-side compatible. MTB style and Road style available.

Mounting adapter to allow you to use a GoPro mount with a Beacon headlight. Compatible with any dynamo headlight using a 10mm mounting tab. Does not include an M6 bolt or nut. Recommended length is 25mm.

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs and shifters (if a fully wired option is selected). With the same size as its predecessor, the slim DN300 battery can be housed inside seat posts or frames ensuring a clean aesthetic. Now with 3 ports, the DN300 simplifies wiring to front and rear derailleurs, supplying stable power at all times. The third port is for riders who seek the redundancy of Shimano's 12-speed Di2 wired option.

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

EC-DN100 is the compact new charger keeping your wireless Di2 battery charged up Includes charger and cord (USB-C)

The new EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Connected via the rear derailleur, it is also compatible with Shimano power meters. Charging of the new Shimano 12-speed Di2 road drivetrains is now accomplished with the EC300 charger cord. Attached to the rear derailleur, this new cord is less expensive than previous chargers and can also be used to charge Shimano power meters.

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

SHIMANO STEPS - Battery Charger - Plug Type A for USA, Canada For charging your SHIMANO STEPS battery without removing it from your e-bike, the EC-E8004-2 charger provides fast charge times and a small connector. It can also charge the battery directly with the use of an adapter. - Lightweight and portable battery charger - Same compact size and weight as EC-E6002 - Rapid charging - Quick charge from half to 80% in 1 hour - Charge from empty to 80% in 2.5 hours - Go from empty to fully charged in 4.5 hours - Equivalent or higher to waterproof grades 5 (IPX5)

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Invisible technology that will help you get to the finish line faster? Yes please. Our Rival power meter unit is entirely contained within the DUB spindle for effortless integration with any bike. Just install, pair, and ride. Features - Spindle-based unit measures left side power to calculate total watts - Long battery life (400+ hours) to power a season of rides - User replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 mins) - Lightweight (less than 40g heavier than standard crankset)

We cut grams out of our aluminum crankarms, but didn’t cut corners on power measurement. Our light and accurate spindle-based power unit nestles into our striking redesigned arms to give you the data you need, and our newest direct mount chainrings are light and stiff while looking good. Features - Spindle-based unit measures left side power to calculate total watts - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 mins) - Lightweight (less than 40g heavier than standard crankset) - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Wide chainline for compatibility with Full Mount rear derailleurs

When you need the best from your training data, the accuracy and reliability of the Force AXS Power Meter spider for thread mount 2x chainrings is the way to go. The spider design uses a proprietary thread-on chainring mount system which allows us to reduce weight and increase stiffness without compromising the ability to swap rings. This dual sided power measurement system, it’s accurate to +/-1.5% even as weather conditions change, and boasts unbeatable battery life. - Thread Mount design is light, stiff and accurate, and fits Force 2x Thread Mount chainrings (Chainrings sold separately) - Dual sided power measurement system, it’s accurate to +/-1.5% even as weather conditions change, and boasts unbeatable battery life (User replaceable CR2032 battery with 200-hour battery life) - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero automatically checks and recalibrates your power meter as you ride - No cadence magnet required - 10K Temperature Compensation and Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - AXS™ enabled for easy monitoring and firmware updates - Includes 8 bolts and thread back up pin for chainring

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

About this item MAGSAFE COMPATIBLE Perfectly aligned magnets in the case maintains compatibility with Qi charging to make wireless charging of your Phone a snap FAST AND SECURE MOUNTING ECOSYSTEM Ultra secure Built-in connection system (called SlimLink) connects to all Peak Design Mobile mounts & accessories for vehicles, motorcycles, bikes, and more DURABLE AND PROTECTIVE Super-slim 2.4mm profile, rubberized full-surround shock-absorbing bumper for 2m (6ft) drop protection, and protective lip around screen and camera lenses GREAT FOR CREATORS Whether you're into photography, filmmaking, videochatting, YouTube rabbit holes, or all of the above, give your phone ultra-portable and pocket-friendly accessories of the PD Mobile ecosystem. SLIMLINK MOUNTING TECHNOLOGY The Everyday Case does more than any other phone case on the planet. A magnetic and mechanical locking and mounting system that we call SlimLink is built right into the back of the case - allowing you connection to all of our Mobile mounts and accessories.

A Samsung phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It can even make your Samsung device work with MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed. Also available for Apple iPhone, or try the Universal Adapter for other phone models.

A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.

Install this adhesive-backed adapter on the back of a 3rd party phone case to make nearly any phone compatible with Peak Design Mobile mounts and accessories. At just 2.5mm thick and wrapped in a beautiful weatherproof nylon canvas, the Universal Adapter is low-profile, aesthetically clean, and adheres with 3M VHB for an ultra-strong, ultra-durable connection. Like the Peak Design Everyday Case, the Universal Adapter has a brilliant magnetic/mechanical lock built right into it. We call this mounting technology SlimLink, and it's so fast and secure that it borders on magic. With this adapter on your 3rd party phone case, you can instantly connect to all Peak Design Mobile mounts and accessories. It even works with Apple MagSafe accessories, too. Adheres to smooth, non-textured, non-porous case materials like hard plastic and metal. Not recommended for soft or rubbery surfaces like silicone or leather. Installing directly on your phone is not recommended. Wireless charging may not be possible or optimal with adapter installed. This adapter contains magnets that may interfere with stylus accessories like the Samsung S-Pen. Not designed for tablets or folding/flip phones.

Redesigned to be compatible with more bike handlebars, the Out Front Smartphone Bike Mount V2 with SlimLink from Peak Design gives you a rigid and secure method to mount your phone as you ride. Made from durable, weatherproof anodized aluminum, the mount connects to your bike via hex or thumb screw, and to your phone via Peak Design SlimLink case or Universal Adapter. SlimLink offers a physical and mechanical connection that can be operated with one hand. Also included is a GoPro-style mount for the option of attaching a light or action camera instead of your phone. Made to sit out in front of your handlebars, the mount stays away from your knees while still being easily viewable, or you can use the thumb screw to flip it forward and record your ride. Additional Features Four sizing collars are included for 7/8, 1, 1.25 & 1.38" handlebars Collars are lined with a grippy silicone pad with Tinuvin 770 UV-stabilizer Designed for round handlebars and not tapered or non-round bars SlimLink supports portrait or landscape mounting Can be installed in reverse to accommodate an optional cycling computer

Designed for a wide variety of mounting setups, the Universal Bar Mount securely holds your phone on the handlebars, stem, or frame of any bike, scooter, stroller, motorcycle, golf cart, and more. Silicone band attaches snugly to wide range of standard bar diameters and can be repositioned easily. Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink) that grabs and locks your phone so effortlessly, it feels like magic. Remove your phone instantly with the push of a button. Easily switch between portrait and landscape alignment without removing your phone. The mounting head clocks in 32 discreet positions so you can position your phone level on any handlebar style. Quickly move this mount from one place to another, or remove it at the end of your ride in places where theft is a concern. Requires a Peak Design Case or Universal Adapter (sold separately).

Nite Ize HandleBand Universal Smartphone Bar Mount - Cell Phone Mount for Bike Handlebar - Phone Holder for Bike Rides - Cell Phone Bike Mount - Bike Stem Phone Mount Product Features Bike Phone Mount: The universal design of this phone bike mount fits nearly every standard and plus-sized smartphone, with or without a case Fits Most Handlebars: The stretchy silicone strap on this bike phone holder mount attaches easily to your bicycle handlebar for convenience and safety Cell Phone Bike Mount: This bike stem phone mount attaches to the handlebar or stem; the phone holder attaches in either a horizontal or vertical configuration Phone Holder with Bottle Opener: This phone mount for bikes has an aluminum base piece that functions as a convenient bottle opener

Keep your apps and maps conveniently accessible whether you are on a ride, running with a jogging stroller, or keeping the kids entertained in a grocery cart. This high-quality design offers a secure hold that can handle even the roughest terrain with confidence. With 360 degrees of rotation, your phone can be easily changed from portrait to landscape or anywhere in between so that your screen is always easy to view. The Wraptor fits standard and plus-sized phones, with or without a case, as well as most handlebar sizes. The universal mount makes this rotating smartphone holder so versatile, it can be mounted on stems, handlebars, and more making it so handy that you'll be surprised at all the places you'll use it. DETAILS This rotating universal smartphone mount allows mounting on both handlebars and stems, so you can easily view in portrait or landscape Durable smartphone harness fits even the largest phones, with or without a case Unique design allows quick-and-easy 360° rotation of phone Universal mounting strap is compatible with most handlebars, stroller handles, grocery carts, and more Securely holds phone in place, on and off road Tool-free mounting strap is simple to attach, holds secure, and allows quick removal for security purposes Dimensions: 2.5in x 1.25in x 5.2in | 65mm x 30mm x 130mm Weight: 1.8 oz | 51g

- Strong rubber straps securely hold phone - CNC machined aluminum mount - Replaceable rubber strap - Come with 2 sizes of straps to fit most smartphones

Garmin Edge 1030, Wahoo Elemnt, GoPro Hero 7 — these things are expensive. This KOM Cycling Garmin/Wahoo bike mount + GoPro undermount locks your precious equipment in with a unique locking system and never lets go. When you’re ready to take your GoPro or bike light off the undermount, a quarter-turn quick release is all it takes Constructed from a high quality proprietary polymer blend that is super durable This combo kit is both a Garmin bike mount and a universal Wahoo mount Fits 35.0, 31.8 & 25.4mm handlebars Simple one-bolt design makes installation a breeze Model: Quick release GoPro mount Mount: handlebar Clamp Size: 35.0, 31.8 and 25.4mm Color: black

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g

A strong K-EDGE Mount yet for today's heaviest computers, cameras, and lights. Upgrade to the Max XL for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance, and craftsmanship matter.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

At 32 Grams the Race Mount is 33% lighter than the “standard” Wahoo Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded