Brakes/Levers/Pads

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro

2-piece center lock rotors for use with Campagnolo hydraulic brake systems. - Rounded external edge prevents cutting of skin in case of contact with rotor - Inner aluminum spider maximizes heat dissipation - EKAR rotors are strong 1.85mm thick stainless tempered steel - Strong, durable, light & resistant to corrosion Specifications: - Rotor Type: Two Piece - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds

The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

- Pad sets include pads and retraction spring for one caliper

Hose fittings for Hayes hydraulic disc brakes

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Replacement levers pivots pin kit for Hayes hydraulic disc levers

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Kool-Stop's C89 Series insert pad was designed to fit in Campagnolo 8 and 9 speed group systems. Also fits Shimano Dura Ace BR-7400 and BR-7403. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly Compounds Options: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Magura type 4. 1 performance pads julie 2008 and prior - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

Magura type 6. 2 endurance pads for marta 2009-11 louise 2007-9 julie 2009 - Endurance series disc pads feature a harder organic compound than the Performance series, giving them a longer wear life but less power. - Steel backing plate

Magura type 5. 1 performance pads for marta 2008 and prior - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

7 Series Disc Brake Pads - Race compound offers maximum stopping power for those who push their materials to the limits

Magura spare part 2701658: one-piece forged 4-piston brake caliper for MT5, MT Trail, Sport, CMe5 (type 5006 4K), with rotatable connection and delivered incl. German ABE and brake pads. Brake pads: organic Material: Aluminum

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

The Magura MT8 is the “Feather” of the Magura performance hydraulic disc brake range. Strutting a full-carbon brake lever, streamlined with Carbonlay, the race-tuned MT8 offers an unrivaled combination of braking power and stability, while weighing in at a mere 299 grams, making it the lightest brake from Magura. This two-finger Carbonlay brake lever is ergonomically designed to reduce strain on the hands, allowing you to easily and accurately apply all the braking power you need on technical terrain and long descents. If something feels off, simply adjust the lever to match your personal reach. The MT8’s 2-piston design generates confidence through its exceptional stopping power and steadiness in ruthless conditions. If you’re the kind of rider that counts grams to count medals, the MT8 earned its degree in Lightweight Performance. This model of the MT8 features a new flip flop lever design that eliminates left/right specifics. Set-up can’t get any easier. MAGURA MT8 NEXT DISC BRAKE FEATURES: Full-carbon brake lever Optimal heat resistance Ergonomic, 2-finger Carbonlay brake lever Tooless adjustment of lever reach and bite point Forged, 2 piston, aluminum brake caliper magnetiXchange brake pistons for easy brake pad replacement Compatible with all MAGURA Storm and Storm SL discs Claimed weight: 299g (lightest brake from Magura) Made, designed, and engineered in Germany Sold individually. Includes: lever, brake caliper, and hose Warranty: 5 year leak proof guarantee for brake levers and cylinders after providing the original proof of purchase

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

Replacement disc brake caliper suited for SRAM CODE R B1/RSC A1 non CPS disc brakes. The hydraulic hose and lever are not included.

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.