Cables

1.2mm x 2,000mm

Sold as each Cable Length: 1700mm Cable Material Stainless Steel Intended Use: Campagnolo Brake Cable Diameter: 1.6mm

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Get your cables under control. - The lightest, quietest, and most versatile cable management system - For specific compatibility concerns, please contact our Customer Service team

Get your cables under control. - Trek cable stops and guides - For specific compatibility concerns, please contact our Customer Service team

- Complete cable kits for internal three-speed hubs

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Brand: Shimano Description: SIL-TEC Road brake inner cable. Stainless steel construction, PTFE coated for improved lifespan and increased resistance. Length: 2050 mm Diameter: 1,6 mm ?

Shimano stainless steel derailleur cable, 3000mm length is long enough for a tandem bike Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Inner Cable: 1.2mm x 2100mm Stainless Steel Comes with the following: sealed outer caps (plastic 5pc), sealed outer caps nose (1pcs), rubber shields (1pcs), inner end caps (1pc)

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

Stainless steel inner 2100 mm (2 pcs.) Stainless steel SIS-SP40 outer caps (4 pcs.) SIS-SP40 sealed outer caps (1 pc.) OT-SP41 sealed outer cap for rear derailleur (1 pc.) Inner end caps (2 pcs.) OT-SP41 1700 mm

ø 1.2 mm x 2100 mm OPTISLICK Stainless steel Sealed outer caps, plastic (5 pcs.) Sealed outer caps nose (1 pc.) Rubber shields (1 pc.) Inner end caps (1 pc.) OT-SP41 2000 mm

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm

Comes with extra RS900 housing for frame to rear derailleur section. Shimano OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm

Shimano Optislick Derailleur Cable and Housing Set Includes 1.0 x 2100mm shift cable, 1.0 x 1800mm shift cable, and 1 x 1700mm housing

Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets

BH90-SB Fits: BR-M985 calipers & BL-M985, BL-M988 levers, XT BR-M785 caliper & BL-M785 levers (0/90 deg) BH90-SS Fits: BR-M596 Brakes (0/0 deg) BH90-JK-SSR Fits: BR-R9170 Brakes (ST Side; 2 type, BR Side ; 1 Type), Olive & Connect Insert, W/TL-BH61 Includes 1 brake hose with hydraulic fittings Color: Black

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors

As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Extend housing runs using these double-ended junction end caps.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.